Operating with 1280 x 960 pixels at 24 frames per second, the Genie
M1280 Mono GigE camera takes advantage of gigabit Ethernet technology,
transmitting data over standard CAT-5e and CAT-6 cables to distances of
up to 100m. Like all Genie cameras, the C1280 is based on AIA (Automated
Imaging Association) GigE Vision Standard to link directly the camera
to a PC.
Software support is via DALSA’s Sapera™ LT software libraries
featuring CamExpert for simplified camera set-up and configuration.
Hardware independent, Sapera LT has been field-proven in tens of thousands
industrial applications and delivers the same reliable performance regardless
of the image acquisition device being used. This unique feature allows
OEMs to start using the Genie without re-writing the application.
In addition, Sapera LT includes powerful diagnostics and setup utilities
for application development, custom camera configurations and system deployment.
*** small and compact
*** 1/3" Sony CCD (6
mm diagonal), 1.2 Megapixel image sensors
*** integrate both advanced
camera and board image acquisition technologies to act as a single machine
*** RJ45 ruggedized screw
mount cable connector making them ideal for industrial and robotic applications
*** global electronic shutter
with exposure control
*** on-board flat-field
correction to produce crisp and clear images.
*** higher frame rates achievable
in partial scan mode and with vertical windowing
*** options for C or CS-Mount
lenses and right angle head
*** simplified set-up with
1280 x 960
3.75 µm x 3.75 µm
44 x 29 x 67 mm (including lens adaptor)
||115g (without lens)
DALSA Genie M1280 Datasheet