Capable of 87 frames-per-second at 12megapixels and
with a global shutter and 10GigE interface,
the three HS12000 models offer a benchmark performance for 10GE imaging.
The 10GigE interface is GenICam and GigE Vision compatible with the added
benefit of a single connection using either SFP+ direct attach or fiber
optic for additional length. The addition of onboard algorithms,
allows the provision of regular imaging tools on board the camera at a
high data rate, thus minimizing additional host CPU cost.
The HS-12000 is available in either monochrome, colour and NIR
versions and utilises a CMOSIS 28mm image format which allows
for an extensive selection of optics.
| Feature |
Benefit |
| • Fast, high resolution |
Increase production with maximum resolution and detects defects
at a very high throughput rate |
| • 10 GigE interface |
Increased bandwidth and high frame rate for more than
one camera with a single connection. Lower power consumption - more
cost-efficient |
| • On-board algorithms |
Reduces host CPU requirements |
| • Global Shutter |
High resolution CMOS sensor with global shutter to ensure zero smearing
at high speeds |
| • High Sensitivity |
Suitable for low light imaging applications such as ITS |
| • Flexible Exposure/Integration Control |
Optimize integration of a wide range of lighting conditions; match
integration time with lighting control for maximum benefit |
| • External Sync and Trigger |
Tight synchronization with I/O control, external PLCs, lighting
and shutters |
| Applications |
|
| • Diagnostic Analysis |
• Intelligent Traffic Systems |
• Semiconductor inspection |
• Food and Beverage inspection |
• Automotive inspection |
| Model |
HS-12000M Monochrome |
HS-12000C Colour |
HS-12000N NIR |
Spectral response |
| Resolution |
|
|
| Sensor |
28mm CMOS
|
| Interface |
10GigE/SFP+ (Direct Attach, Fiber
Optic) |
| Frame Rate |
87 fps
|
| Pixel Size |
5.5 um |
| Memory |
500MB DDR2, 125MB
NOR FLASH |
| Shutter |
Global |
| Triggering |
Software, External
(Pulse or Edge) |
| Mount |
28mm, M42x1x12mm BFL, F-mount Avail
|
Power Requirements
|
9W, 12V |
| Temperature |
Operating 0 — 45C; Storage -30 to +60C |
| Compliance |
CE, FCC, RoHS,
WEEE, GigE Vision, GenICam |
| Dimensions |
138 x 58 x 50mm w/o F-mount
|
| Weight |
350g |
| |
|
HS-12000 Datasheet
|