AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request More Product Information

Contact us
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
 
Victorem CX series
Back to IO Industries
Back to CoaX cameras
Back to high speed cameras
Back to Ultra-high-resolution colour cameras
Back to Ultra-high-resolution monochrome cameras
Back to high resolution colour cameras
Back to high resolution monochrome cameras
Back to standard resolution colour cameras
Back to standard resolution monochrome cameras


Applications
Factory Automation
Virtual and Augmented Reality
Scientific Research
Motion Capture
LCD Inspection
Slow Motion Imaging
Aerospace & Defense
PCB inspection


Features
High-performance 0.4MP-20MP models
Fast frame rates with high-quality images
Compact and light-weight
High-speed digital video outputs
Flexible lens selection and mounting
Long-distance CoaXpress cabling
Easy to mount
Monochrome and colour CMOS sensor


A camera series flexible enough to meet your specific requirements

Catering to a wide variety of applications and circumstances, the Victorem CX series offers 8 high-performance cameras
with resolutions ranging from 0.4MP to 20.5MP and frame rates into the hundreds of frames per second. Powerful but compact, these cameras are ideal for an array of machine vision applications including performance-driven applications such as volumetric video capture, machine vision and automated optical inspection.

Sensor quality
With high resolution, low noise, excellent dynamic range and colour accuracy. The cameras feature adjustable exposure and gain, manual or automatic, with look-up-tables for gamma or contrast enhancement. For fast moving objects, adjustable window settings allow smaller regions of the sensor to be output at higher frame rates.

Shutter

Incorporating global shutter technology (excluding the Victorem 205R26), these cameras capture and freeze fast-moving objects without motion distortion.

While the Victorem 205R26's rolling shutter
is susceptible to motion distortion, controlled lighting and using the camera's timing features correctly makes it possible to freeze motion as would a global shutter.

Throughput
CoaXPress protocol makes it possible to stream a large quantity of video data at full-resolution and at full-bit depth rate of each sensor with no restrictions. Other interfaces such as GigE Vision or USB3 Vision offer lower bandwidth than CoaXPress, so fewer frames per second or a lower bit depth must be used. Additionally, low-cost, flexible coaxial cabling can be used with long distance allowances over 100m.


Use in situ
Compact and light-weight, ensures the cameras can be installed in a wide variety of locations and camera enclosures, while maintaining adequate thermal management of the internal electronics. cameras can easily be attached to a variety of mounting arms. If using self-mounted optics (microscopes, telescopes, etc.), the cameras can be mounted only to the lens itself. A mounting adapter plate is available with common 1/4"-20 threading for tripods. One or more of these may be attached to all four sides of the camera.

Flexible and simple lens and mounting
An adjustable C-mount lens interface allows the back-focal distance to be set forwards or backwards. Depending on the lens being used, focus can be properly set either near the camera or at the infinity point of the lens and the adjustment is simple. An Active EF Mount adapter is available to attach and control a wide range of photography lenses.


VICTOREM - CX series
4B523
16B276
24A164
32B216
51B163
89B93
120B68
205R26
Resolution
720 x 544
1456 x 1088
1920 x 1200
2064 x 1544
2464 x 2056
4112 x 2176
4112 x 3008
5472 x 3672
Sensor type
CMOS
Max frame rate (8 / 10 / 12-bit)
523 / 436 / 319
276 / 226 / 165
164 / 164 / 128
216 / 191 / 167
163 / 144 / 89
93 / 88 / 63
68 / 64 / 46
26 / 26 / 22
Max. Single-Link Frame Rate
523 / 436 / 319
276 / 226 / 165
164 / 164 / 128
183 / 146 / 118
116 / 93 / 77
65 / 52 / 43
47 / 38 / 31
26 / 23 / 19
Sensor options
Colour or Monochrome
Shutter
Global
Rolling- Global reset
Pixel Size
6.9 x 6.9µm
3.45 x 3.45µm
5.86 x 5.86µm
3.45 x 3.45µm
2.4 x 2.4µm
Output configurations
CoaXPress (v1.1), 1 or 2 links at 2.50Gbps (CXP-2), 3.125Gbps (CXP-3), 5.0Gbps (CXP-5) or 6.25Gbps (CXP-6)
Multiple ROI
Not supported
Up to 2
Up to 4
Up to 8
Not supported
Lens mount
C-mount or Active EF-mount
Dimensions and weight
33.0 mm x 44.0 mm x 53.7 mm (WxHxD); 140 g
Power requirements
24V via PoCXP or 7-30 V direct DC, 3-4 W
Operating temperature
-30°C to 65°C, 20-85% humidity (non-condensing)

Need a price or more information? Please email Adept Turnkey or call our offices

Adept Turnkey Pty Ltd are Machine Vision and Imaging specialists and distributors of IO Industries Machine Vision products in Australia and New Zealand. To find out more about any IO Industries or any other Machine Vision product, please call us at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.

 

 

 

If you like this page, please recommend and share it.

Facebook Twitter More