AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request More Product Information

Contact us
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
 
Flare 2M280-CX
Back to IO Industries
Back to High-speed cameras
Back to
Ultra-high-resolution colour cameras
Back to ultra-high-resolution monochrome cameras

High-speed, high-resolution motion-capture camera
Low-power, low-heat, low-noise design

Applications
Broadcast and cinema
Inspection and monitoring
Motion capture
Research


The Flare 2M280-CX can be combined with IO Industries' high-speed DVR to provide a robust motion-capture system

Features    
• Monochrome and colour and models • Selectable 8-bit or 10-bit pixel depth • Pipelined global shuttering with Correlated Double Sampling
• High Dynamic range modes • High-dynamic-range modes • Multiple ROIs and subsampling
• Power over CoaXPress supported   • Low power comsumption


The following short video sequence was recorded by Brent Delhaye using a Flare 2M280 CX
with 1 Coax cable to connect with a DVR Express Core. No extra lighting was used

     
     
Model Flare 2M280-CX  
Sensor CMOS 2/3" - monochrome, colour (Bayer) and NIR-enhanced  
Resolution 2048 x 1088 pixels  
Max frame rate 283 fps  
Pixel size/format 5.5µm square/ 8-bit or 10-bit  
Data output Dual or single link CoaXPress 3.125 Gb/s per link (CXP-3)  
Lens mount C- Mount or T-Mount  
Dimensions 63.5 mm x 63.5 mm x 44.1 mm  
Weight 310 g  
Ambient operating temperature Up to 50°C  
Power requirements 12V DC (via Hirose or PoCLXP)  
Power consumption 4.5 W (typical)  


Flare 2M280-CX data sheet

 

 

 

If you like this page, please recommend and share it.

Google+ Facebook Twitter More