The CB-040GE is a high speed SVGA colour GigE camera ideal for demanding
industrial applications. The 782 x 582 pixel
sensor is capable of speeds of 61 full resolution frames per second in
continuous (free-run) mode and higher frame rates with Partial Scan. With
8.3µm x 8.3µm
pixel area, the CB-040GE gives excellent sensitivity and low noise images.
The CB-040GE is part of Jai's C3 (Camera Core Concept) family which offers one core concept, one interface (GigE) and one simple choice. It features in the compact section of the C3 family and so offers a small common size housing for easy camera exchange. The GigE Vision interface standard ensures high bandwidth (1000 Mbps), uncompromised data transfer up to 100 meter cable lengths with the ability to connect to multiple computers. Additionally low cost cables, standard hardware and high scalability allow for cost effective machine vision and image processing applications.
The unique, user-definable variable partial scan mode, enables the user to designate scanning to occur on any contiguous set of lines located anywhere in the full scan area. The programmable General Purpose IO allows flexible configuration of inputs/outputs as well as the timer/counter function.
With its GigE architecture, the CB-040GE is ideally suited for use in a very wide variety of applications where size, performance, cost or cable length is important.
||1/2" Prog Scan CCD
||782 x 582
||Bayer RGB Colour
||8.3 x 8.3µm
||GigE Vision, 8-bit or 10-bit
|Max. Line / Frame Rate
||1/60 to 1/10,000 in 10 steps
||-5°C to +45°C
||12V DC ± 10% 3.6 W
||29 x 44 x 75 mm
JAI CB-040GE Datasheet