SMALL AND LIGHT, REMOTE HEAD AND GIGE
About the CM-030GE RH
Part of Jai's C3 Compact series, the camera is based on Sony's monochrome
ICX424 1/3" progressive scan CCD with 0.3 million
pixels and provides a standard GigE Vision / GeniCam-compliant digital
interface. The CCD sensor is positioned in a remote head
with a 2-metre-long cable making this camera suitable for space- or weight-critical
machine vision applications.
With 656 x 494 active pixels, the CM-030GE RH delivers
120 full frames/second in continuous (free-run) mode.
Higher frame rates (up to 504 frames/second) can be achieved
by using the partial scan modes or vertical binning mode.
Multiple trigger modes are available in addition
to continuous operation, including edge pre-select, pulse width control,
frame delay, and reset continuous triggering. The camera also features
a “sequence trigger” mode which enables users
to pre-define multi-trigger repeating sequences where gain, shutter, and/or
region of interest (ROI) is instantly changed as each new trigger in the
sequence is received.
The programmable GPIO allows flexible configuration of inputs/outputs
as well as the timer/counter function.
The CM-030GE-RH is supported by JAI’s own vendor-independent
SDK and control tool software (Windows 7, Windows XP and Windows
Vista), as well as being compatible with any GigE Vision / GenICam-compliant
third-party software libraries and tools.
Where can I use the CM-030GE RH?
Being compact and light, the camera is can be used in any situation where
space, weight and cable length are critical, for example:
*** Surface mounting
*** Semi-conductor inspection
*** Surface inspection
||659 x 494
||7.4 x 7.4µm
||GigE Vision, 8-bit or 10-bit
|Max. Line / Frame Rate
||1/120 to 1/30,000 in 9 steps
||-5°C to +45°C
||12V DC ± 10% 3.6 W
||29 x 44 x 75 mm (CCU) 17 mm dia. x 46 mm (head)
||130 g + 120 g (head with 2m cable)
JAI CM-030GE RH Datasheet