AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request More Product Information

Contact us
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
 
JAI Fusion Flex
Back to JAI Cameras
Back to High Speed Cameras
Back to High Resolution Colour
Back to High Resolution Monochrome
Back to Multispectral Cameras
Back to Ultra High Resolution Colour
Back to Ultra High Resolution Monochrome




The Fusion Flex by industrial camera manufacturer JAI empowers vision system designers the ability to choose where and how wide the wavebands are. The Fusion Flex leverages JAI's powerful FusionSeries 2-CMOS and 3-CMOS prism-based multispectral cameras.

The Fusion Flex allows you to access powerful inspection techniques with cameras fine tuned to look at specific features. This can reveal new and additional imaging information as well as reduce cost and time to develop an application.

JAI offers an easy-to-use online configurator to customise your camera. In a simple step-by-step process you select the number of sensors, the resolution and whether Bayer or monochrome sensors are to be used in the visible spectrum. Then the intuitive GUI lets you drag and place your wavebands on a spectral chart at required wavelength locations, and then select the width of those wavebands.

 

Features and benefits    
• Multispectra 2 or 3-CMOS prism cameras that allow for customisation of wavebands for a specific application.
• 2 or 3 wavebands located anywhere between 405-1000 nm.
• Wavebands can be as narrow as 25 nm at increments of 5 nm.
• Precision Time Protocol support
• Low-noise Sony PregiusTM IMX273 (1.6 megapixels) or IMX252 (3.2 megapixels) per waveband.
• 10GBASE-T GigE Interface (GigE Vision and GenICam compliant) auto-negotiates to lower speeds as needed.
• Option to use Bayer sensor in visible spectrum to provide additional spectral data.
• Single- and multi-ROI modes.
• Separate or unified control of key camera parameters for each channel.
• Easy to use on-line configurator for smooth project start-up.
     
Applications    
• Fluorescence-guided surgery, pathology, or other life sciences applications
• Food and vegetable sorting/inspection
• Agriculture and vegetation analysis or weed removal systems
• Multi-layer electronic circuit board inspection
• Package inspection, especially printed plastic packages
 

 

Model
FSFE-1600D-10GE
FSFE-1600T-10GE
FSFE-3200D-10GE
FSFE-3200T-10GE
Sensor
1/2.9” 2-CMOS global shutter (IMX273)
1/2.9” 3-CMOS global shutter (IMX273)
1/1.8” 2-CMOS global shutter (IMX252)
1/1.8” 3-CMOS global shutter (IMX252)
Frame rate, full frame
226 frames/sec. @ 8-bit
213 frames/sec. @ 8-bit
123 frames/sec. @ 8-bit
107 frames/sec. @ 8-bit
Active pixels
1440 (h) x 1080 (v) x 2 sensors
2048 (h) x 1536 (v) x 2 sensors
Pixel Size
3.45 µm x 3.45 µm
Active area
4.97 mm (h) x 3.73 mm (v) - 6.21 mm diagonal
7.07 mm (h) x 5.30 mm (v) - 8.83 mm diagonal
Dimensions (H x W x L)
62 mm x 62 mm x 86.5 mm (excl. connectors)
Interface
GigE Vision 2.0
Lens Mount
C-mount
         
         

FSFE-1600D-10GE -- FSFE-3200D-10GE
FSFE-1600T-10GE -- FSFE-3200T-10GE

 

 

 

If you like this page, please recommend and share it.

Google+ Facebook Twitter More