is a compact, UV-sensitive, high-resolution (2
Megapixels) Gigabit Ethernet progressive scan 1" CCD camera
with a frame rate of 34 fps at 1600 x 1200 resolution. A single-tap mode
at 17 fps is user-selectable.)
The TM-2040GE delivers an outstanding signal-to-noise
ratio of >58 dB in typical operation.
A high-performance front-end provides 12-bit linear output, or can be
set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in
Other features include:
** image center partial scanning (600, 300, or 150 lines)
** user-definable variable partial scanning (any number of lines with
any starting point)
** flexible 2X binning (horizontal, vertical, or both),
** defective pixel compensation
** PIV mode.
The TM-2040GE is supported by JAI's easy-to-use SDK and Control
Tool software, offering straightforward setup and full GigE Vision
and GenICam compliance and also integrates smoothly with
a variety of third-party GigE Vision software libraries and development
The user-friendly Graphical User Interface, provided as part of the camera's
extensive Software Development Kit (SDK), allows users to control all
camera functions easily. Changes to the acquisition mode of the camera
automatically updates the API for easy image acquisition.
With its GigE architecture, the TM-2040GE is ideally suited for use
in a very wide variety of UV applications where size,
performance, cost or cable length is important.
A Camera Link version of this camera is also available.
|| TM-2040GE (UV enhanced)
||1" progressive scan monchrome CCD
||1600 x 1200
||7.4 x 7.4µm
|Max. Line / Frame Rate
||1/34 to 1/32,000 sec in increments of 24 µs
||C, F, M42 mount
||-10°C to 50°C
||12V DC ± 10%, 800 mA (typical at 25° C)
||51 x 51 x 85 mm
JAI TM-2040GE Datasheet