AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request More Product Information

Contact us
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
 
BL1-D1312(IE)-CL series
Back to Photonfocus Cameras
Back to High Resolution Monochrome Cameras
Back to High Speed Cameras


Board-Level Cameras:

Compact solutions for application-specific systems
BL1-D1312-40-CL-12 and BL1-D1312IE-40-CL-12
BL1-D1312-80-CL-12 and BL1-D1312IE-80-CL-12
BL1-D1312-160-CL-12 and BL1-D1312-160IE-CL-12
BL1-D1312-240-CL-12 and BL1-D1312IE-240-CL-12
Available on request:      
BL1-D1312I-40-CL-12
BL1-D1312I-80-CL-12
BL1-D1312I-160-CL-12
BL1-D1312I-240-CL-12

Equipped with the A1312 and A1312IE CMOS image sensors, this board level camera series BL1-D1312 (IE)-CL is appropriate for easier integration into tailored customer applications, especially where space or weight is a limiting factor, but where all the features and technical data are identical to the standard cameras except for the mechanical dimensions. The footprint of these cameras is as small as 46 mm x 46 mm while the depth varies depending on the product type and chosen interface. On request the A1312I image sensor can be implemented.

This series was derived from the MV1-D1312(IE)-CL camera series and is 100% compatible with the feature set of the standard series, the only differences being in the mechanical construction of the camera case. These Photonfocus CMOS sensors with a full well capacity (FWC) of 90 ke- are optimized for high dynamic range applications and a high signal-to-noise ratio (SNR)and have a CameraLink Base interface. Four camera models with different speed grades are available with either an A1312 or an A1312 (IE) sensor (see model numbers above).

Focusing on demanding applications in industrial image processing, the cameras offer a wide dynamic range and a high frame rate combined with high resolution. Their global shutter means that even high-speed applications, with exposure times in the µs-area, are possible.

Features
• Configurable Region–of–Interest; up to 512 • 2 look-up tables (12-to-8 bit) on user-defined image region • 3 x 3 convolver for image pre-processing in the camera
• Dynamic range up to 120 dB via LinLog® • Integrated digital reduction of fix pattern noise (FPN) • Integrated shading correction
• Spectral range: 370 - 1000 nm A1312 • Temperature monitoring of sensor and camera • Ultra-low trigger delay and low trigger jitter
• Spectral range: 370 - 1050 nm A1312IE • BL1 form facto:r 46 x 46 mm² (W x H) • Good near-Infra-red response (cameras with A1312IE sensor)

Model
BL1-D1312-40-CL-12
BL1-D1312-80-CL-12
BL1-D1312-160-CL-12
BL1-D1312-240-CL-8
Resolution
1312 x 1082 pixels
1248 x 1082 pixels
Sensor
1.4 megapixel progressive scan 1" CMOS monochrome
Pixel Size
8 µm square
Max. Frame Rate
27 fps
55 fps
108 fps
170 fps
Interface
CameraLink serial. Baudrate user-selectable
Pixel Clock
40 MHz
80 MHz
Grayscale Resolution
8–bit/10–bit/12–bit
8–bit
Mount Type
C-Mount–(CS-Mount–optional)
Operating Temp
0°C ... +50°C
Power Requirements
+12V DC (±10%)
Dimensions

BL1 form facto:r 46 x 46 mm² (W x H). Depth varies depending on the product type and chosen interface

Photonfocus BL1-D1312(IE)-CL Series Board-level Camera Datasheet

 

 

 

If you like this page, please recommend and share it.

Google+ Facebook Twitter More