AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request More Product Information

Contact us
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
 
Phantom v2511
Go to Phantom High Speed Cameras
Go to High-resolution Monochrome Cameras
Go to High-resolution Colour Cameras
Go to High Speed Cameras
Go to CineMag/CineStation

Phantom v1610 left-front side

Designed for speed and flexibility and using a widescreen CMOS monochrome or colour sensor, the V2511 is an excellent tool for researchers, scientists and engineers who need to capture high-resolution images at very high speeds.

Acquiring and saving more than 25 gigapixels-per-second of data and offering full megapixel resolution of 1280 x 800, means that greater than 25,000 frames-per-second can be achieved at full 1 megapixel resolution. At reduced resolution, the v2511 provides frame rates of up to 677,600 fps. Equipped with the unique FAST option (export controlled) enables frame rates up to 1,000,000 fps at 128 x 32 resolution and so further expanding the v2511’s versatility.

The camera's CMOS sensor has 28 micron pixels and an innovative design to ensure the level of light-sensitivity -- essential in ultra-high-speed imaging -- while standard 12-bit depth per pixel yields high dynamic range and provides excellent image quality.

The v2511's ease-of-use features include common signal connections conveniently located on its back panel, and include connections for timecode, dual power inputs, HD-SDI, a GPS input, frame synchronization, and trigger. The two HD-SDI ports can be configured in several ways and can act as identical 4:2:2 HD-SDI ports where one port can be set up to provide an (optional) on-screen display for monitoring the on-camera controls and camera operation. They can also be configured as a single 4:4:4 Dual-Link HD-SDI port.

An internal mechanical shutter allows for automatic and remote black references, ensuring high image-quality even when it is not possible to cover the lens manually prior to a shot.

The camera is supplied with a Nikon F-mount that also supports G-mount lenses. Alternatively, it can use a Canon EF mount or C-mount.

Equipped with 24GB, 48GB or 96GB of high-speed memory, attaching a Phantom CineMag feature (that comes standard on the v2511), cine save times can be minimize. The CineMag feature saves any shot from high-speed RAM to a CineMag in seconds.

Features
Segment memory for up to 63 cines in multi-cine mode
Continuous recording. Record to CineMag at up to 1Gpx/second
Memory gate
Event marking
Frame timestamp
IRIG In (modulated and unmodulated); IRIG Out (unmodulated)
GPS input for GPS timing, latitude & longitude
Shutter off mode for PIV exposure
500 ns straddle time
Burst mode
Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
Secondary IP address
Field-based firmware upgrade capable
Easy-to-access connections on back of camera

Image Storage
At ultrahigh-speeds, memory can become a limitation to recording length. A camera with 96GB of memory, recording at 10,000 fps at 1280 x 800 can record a single high-speed shot for up to 6.2 seconds. Or, segment memory into up to 63 segments and record shorter cines (high speed shots) into each segment.

Minimize cine save times with the Phantom CineMag feature that is standard on all ultrahigh-speed models. With the ability to save 1GB/s of data to an attached CineMag, a 96GB shot can be saved in about 1.5 minutes. The resulting cine is securely stored in non-volatile memory and can later be viewed on a PC, trimmed, played to video, and saved either by placing the CineMag back on the camera, or using our offline Phantom CineStation® which is CineMag reader that connects to a PC with Gb or 10Gb Ethernet.

Specifications - Phantom V2511 - colour and monochrome
Resolution - full
1280 x 800
Sensor
CMOS , 28 µm pixel size, 12-bit depth, Mono and colour
Throughput speed
25 Gpx/s
Maximum frames
25 000 fps at full res.
Video Out
Analog video available on Break-out-Box. Two HD-SDI ports on camera. Component viewfinder port
Memory
24 GB, 48 GB, 96 GB high-speed internal RAM. CineMag up to 512 GB
Dimensions/Weight
28 x 19 x 17.75 cm (L,W,H) w/out handle (7.6cm) or lens. 7.7 kg w/out lens
Temperature
-10 to +50 C - operating. -20 to + 70 C - storage
Shutter
Global electronic
Power
100 - 240 VAC, 220 Watt power supply included. 20 - 28 VDC backup battery input on camera back panel

Phantom v2511 Datasheet

 

 

 

If you like this page, please recommend and share it.

Facebook Twitter More