AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request More Product Information

Contact us
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
 
Phantom Miro C110
Go to Vision Research Cameras
Go to High Resolution Monochrome Cameras
Go to High Resolution Colour Cameras
Go to High Speed Cameras
Vision Research's Phantom Miro M320S digital high-speed camera

Cost-effective, easy-to-use and compact, the Miro C110 colour and mono high-speed camera is suited to any situation that needs high-quality/high-speed capture and is suitable for a wide variety of deployments from industrial trouble-shooting to laboratory analysis.

Features
The sensor
Based on a 1.3 Mpx, 1/2"-format, 5.6 µm pixel CMOS sensor with 1.0 Gpx throughput, the sensor captures critical details at 800 fps with very low noise. Lower the resolution and the camera captures at a very high 29 840 frames-per-second.

Exposure time

The camera's exposure time can be set as low as 5 microseconds to help eliminate motion blur and freeze objects in motion.

Connectivity
The small-bodied but strong camera connects to signaling with common BNC cables and uses a standard Ethernet cable for camera control and data downloading.

Easy-to-use signals

Am accessible Trigger BNC and two programmable I/O BNCs make the camera easy to control in any situation.

The trigger
The Miro's C110's easy-to-use but powerful Phantom Camera Control software makes capturing a smooth process; adjusting image characteristics like colour and brightness and then automatically recording them into a circular buffer. Setting the trigger options determines which images are saved to RAM - images before, after or on either side of the trigger (depending on the set up of the event).

Memory
Equipped with 8 GB RAM allowes a 5-second recording time at maximum frame rate and resolution. Longer recording times are achieved by lowering the rate and the resolution.

Advanced features
Also included are a set of advanced features that support analysis. These include:
• Image-based Auto-trigger: where the camera is triggered when motion is detected in the event - a boon when capturing unpredictable or rare events
• Multi-cine: internal memory can be partitioned into up to 63 segments and not miss back-to-back action by capturing in shorter segments
• Continuous recording: continuous recording mode automatically saves a cine to a connected PC immediately upon capture and then sets itself up to capture again.


Model Phantom Miro C110

Sensor

1/2" 1.3 Megapixel, 5.6 µm pixel CMOS colour or mono sensor. 12-bit
Resolution 1280 x 1024 fps
Frame rate 800 frames-per-second at full resolution
Light sensitivity ISO Mono 5 000 (T), 2 500 (D). Colour 640 (T), 640 (D) adjustable. Measured according to ISO 122326:2006 method
Interface

Gb Ethernet

Mount Reversible mount for C and CS lenses
Memory 8GB RAM included
Operating temperature 0 to 50C
Weight 0.54 kg
Dimensions 73 (H) x 93 (W) x 82.5 (D) mm
   

Phantom Miro C110 data sheet


 

 

 

If you like this page, please recommend and share it.

Google+ Facebook Twitter More