Xcelera-CL+ PX8 Dual
Back to Dalsa Frame Grabbers
Teledyne Dalsa delivers the industry's most reliable
and versatile family of frame grabbers combining industry leading
performance with industry leading feature sets, great value and
extensive camera support. Board-level innovations deliver Trigger-to-Image
Reliability significantly increasing system performance and
ultimately helping to increase yield.
Designed with the requirements of the machine vision OEMs in mind,
the Xcelera Series ranges from entry level frame grabbers, to high-performance
image acquisition boards,
to embedded vision processors.
Addressing the emerging needs of bandwidth-hungry machine vision
applications, the Xcelera Series is defining next-generation frame
grabber capabilities with the ability to deliver
bandwidth beyond 1GByte/s over multiple-lane PCI Express
(PCIe) implementations with room to grow.
Teledyne Dalsa image acquisition boards have been field tested and
approved for use with more than 200 cameras covering a wide range
of characteristics, requirements and specifications.
The Xcelera-CL+ PX8 Dual is
a Camera Link frame grabber that is based on the PCI Express x8
interface. Compatible with two Base or one Medium Camera Link®
cameras, the Xcelera-CL+ PX8 Dual supports a wide variety of multi-tap
area and line scan colour and monochrome cameras.
The Xcelera-CL+ PX8 Dual has been built within Teledyne DALSA’s
Trigger-to-Image Reliability technology framework. Trigger-to-Image
Reliability leverages Teledyne DALSA’s hardware and software
innovations to control, monitor and correct the image acquisition
process from the time that an external trigger event occurs to the
moment the data is sent to the host, providing traceability when
errors do occur and permitting recovery from those errors.
|The Xcelera-CL+ PX8 Dual is supported by
Teledyne DALSA's Sapera Vision Software Packages:
|Teledyne DALSA Platform Development
Advantage - Free Run-Time Licensing
|The Sapera Essential standard
processing tool run-time license is offered at no
additional charge when combined with Teledyne DALSA frame
grabbers. This software run-time license includes access to image
processing functions, area-based (normalized correlation based) template
matching tools, blob analysis and lens correction tools.
features and benefits
|• Half-length PCI Express x8 Board
|| • Acquires images from one Camera Link®
Medium, or two Base PoCL cameras
|• Rapid image transfer rates beyond
||• On-board FPGA based real-time Bayer decoding
and shading correction
|• Supports Camera Link operations
from 20 to 85MHz
||• Fully supported by T2IR framework
|• ROHS compliant
||• Power Over CameraLink (PoCL) Compliant
|• Free Run-time Licensing (conditions
||• Windows XP Professional and windows 7 (32/64-bit)
||Xcelera-CL+ PX8 Dual
||Two Base or One Medium Camera Link
||20 to 85 MHz
|Bits / Pixel
||up to 16
||PCIe x 8
||ILUTS, Flat Field, Flat Line, Dead Pixel, Bayer, PoCL
Xcelera-CL+ PX8 Dual Data Sheet
What is PCIe host interface?
PCIe host interface is a point-to-point host interface and allows
simultaneous image acquisition and transfer involving little intervention
from the host CPU
What is Trigger-to-Image
Trigger-to-Image Reliability technology framework leverages
DALSA’s hardware and software innovations to control, monitor and
correct the image acquisition process from the time that an external trigger
event occurs to the moment the data is sent to the host providing traceability
when errors do occur and permitting recovery from those errors.