High
performance at less cost for industry, science and entertainment
All-purpose,
mid-range and budget conscious high-speed cameras Noted for their high-end, ultra-slow-motion products,
Vision Research's Phantom VEO offers a choice of 8 high-speed
models and four performance levels in 2 body types to make a better
job of choosing the right camera to suit your specific needs at
a more affordable price-point.
Two body types
Versatile and flexible, the Phantom VEO is offered with two body
types: L (Light) or S (full featured) and three levels of on-board
memory to suit your required record time.
The L style includes everything needed for software-based
capture and motion analysis and suits traditional imaging applications,
while the extra-featured S models include additional
signal availability, on-camera controls for portability, ruggedized
connectors and compatibility with removable CFast 2.0 storage
media.
Both L and S versions are available with a choice of three levels
of on-board memory (18GB, 36GB or 72GB). Additionally, the S models
come with a CFast 2.0 non-volatile memory card for easy and fast
offloads to non-volatile memory. This is especially suited to
using the VEO as a remote or un-tethered camera. Read
more detail about the Phantom VEO
Key features
• Time Code Out
and Time Code In
• Easily-accessed
play-back buttons
• Operates tethered
to PC or untethered
• On-camera controls
(S models) for untethered operations
• Cines viewed
live or played back from RAM
• Programmable
I/O, SDI and HDMI video outputs
• Triggered from
on-camera controls
• Removable storage
via CFast2.00 card
• Ethernet cable
for tethering
• Adjustable
frame rate and resolution
The VEO offers models for industrial and scientific
imaging and also for Film and TV applications. Four models: VEO 410L,
410S, 710L and 710S are designed primarily for applications in scientific
and industrial areas. The VEO 340L, 340S, 640L, 640S can be used for industrial
and scientific imaging but because of their 4MP resolution and features
for portability the S models also lend themselves to Film/TV and Media
applications.
Phantom VEO for Film and TV - for affordable,
super-slow-motion capture
Catering to the budget-conscious Film and TV media VEO offers a choice
between two attractively-priced, high-speed models.
Both the VEO 640S and the VEO 340S include features
such as additional signal availability, on-camera controls for use with
video monitors, ruggedized connectors and compatibility with removable
CFast 2.0 storage media. Additionally, the cameras' small 5" form
factor, together with Abel Cine Essentials kit, enable a number of different
rigging options.
Uninterrupted workflow
Cines are recorded to the camera's on-board RAM, trimmed and then saved
to CFast media which can be swapped out when full.
This workflow eliminates downtime by keeping the camera online and waiting
for the next capture. Multiple takes are also possible with the large
72GB RAM capacity which can be segmented.
Capture time
Capturing more frames than most comparable cameras in today's market and
depending on the type of shot being taken, the frame rate and resolution
can be adjusted.
For the VEO 640S, shoot 1400 fps at 2560 x 1600 or reduce the resolution
to 1920 x 1080 for 2500 fps.
The VEO 340S can provide 800 fps at full resolution and 1100 fps at the
reduced resolution of 1920 x 1080. Other variations to resolution and
frame rate are also possible. Recording time at full resolution for the
VEO 640S is 8.5 seconds and for the VEO 340S, recording time is 15 seconds
at maximum resolution; both saved into maximum internal memory. Read
more detail about Phantom VEO for film and TV
About CFast
The CFast workflow is similar to the CineFlash module of the Phantom Miro.
Cine files are recorded first to RAM and then transferred to the card
at a speed of 90MB/second. As with the Miro Cineflash the VEO CFast card
does not support Run/Stop mode or playback over video and must be formatted
NTFS. Because of this format, no special drivers are required for downloading
the cine files via Windows or Mac.
The VEO is offered at a
lower price point than Vision Research's other high-performance cameras
VEO
410L and 410S
VEO
710L and 710S
VEO
340L and 340S
VEO
640L and 640S
Sensor
1 megapixel CMOS 25.6 x 16 mm sensor. 12-bit depth
4 megapixel CMOS 25.6 x
16 mm sensor. 12-bit depth
Pixel size
20 µm
10 µm
Resolution
1280 x 800 pixels
2560 x 1600 pixels
Frames-per-second- full resolution
4000 fps at full resolution
7400 fps full resolution
800 fps full resolution
1400 fps full resolution
Internal memory
Choice of 18 GB, 36 GB, 72 GB RAM
Throughput
4 Gigapixels/second throughput
7 Gigapixels/second throughput
3 Gigapixels/second throughput
6 Gigapixels/second throughput
To read more about each camera,
please use the links at the top of the page
Adept Turnkey Pty Ltd is"The Machine Vision and
Imaging Specialists" and distributor of Vision Research products
in Australia and New Zealand. To find out more about any Vision Research
or any other Machine Vision product, please call Adept Turnkey at Perth
(08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact
us online.
If you like this page, please recommend and share it.