Adding very little to
the camera's size, and weighing just over 400 g, Colibri is ideally
suited for mobile applications. Responding to customer requests
for a an extremely small and cost-effective camera housing, with
just 50 x 50 mm (w x h) and 181 mm, or 211 mm, the overall length
is only slightly larger than the protected camera with lens and
port.
Built for cameras with a 29 x 29 or 30 x 30 mm cross section and
lenses with a maximum diameter of 39 mm, the enclosure adds only
10 mm space between the camera and the outer enclosure wall. A variety
of connectors with up to 20.5 mm in diameter can be inserted. The
30 - 40 mm profile adapter can be easily fitted to the modular design
and are attached to machines with a newly-developed dovetail profile
system. Using an M25 cable gland allows feed-through and sealing
of cables/plugs with diameters of up to 21 mm.
Rated IP66 (NEMA 4 + 6), the enclosure's opening
window enables the use of wide-angle lens as they can be installed
right behind the front window. Additionally, optional, tamper-proof
enclosure lids can be attached to prevent unauthorised adjustment
of the lens.
The enclosure's opening window enables the use of wide-angle lens
as they can be installed right behind the front window. Additionally,
optional, tamper-proof enclosure lids can be attached to prevent
unauthorised adjustment of the lens.
|
•
For cameras with 29x29 or 30x30mm cross section |
•
Clear
aperture 28mm diameter: lenses up to 39mm diameter |
•
IP66 - Protection from high pressure water jets (Nema 4 +
6) |
|
•
Robust build - aluminium extrusion profile |
•
Light weight - just over 400 gr |
•
Small form factor - adds only 10 mm around a 30 x 30 mm camera |
|
•
flexible camera positioning |
•
High chemical resistance - special requirements catered for |
•
Cable gland enables assembly of several cables and connectors |
|
•
Passive camera cooling - 10°C cooler inside |
•
Vibration-proof mounting |
•
Clear aperture 28 mm diameter takes lenses up to 39 mm diameter |
|