AT logo - The Machine Vision Specialists  
  Frame Grabbers  
  Vision Systems  
  Contact AT  
  Site Map  
Request More Product Information

Contact us

(08) 9242 5411

(02) 9905 5551

(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
Mako U-130B
Back to AVT Cameras
Back to Standard resolution monochrome cameras
Back to High-speed cameras
Back to USB3 cameras

Built with an ultra-small footprint and with screw locks to ensure safe electrical connections in harsh environments, the Mako U series of USB3 cameras offer resolutions from VGA to 5 megapixels and up to 550 fps (depending on the model).

Every model is powered over the USB interface and has opto-isolated I/Os. The two non-isolated GPIO lines are TTL-based and programmable as input or output. This feature provides maximum flexibility for adaptation to individual application requirements as well as allowing easy operation of peripheral components.

The Mako U series provides great performance at low cost.

• Defect pixel correction (on/off) • Fixed pattern noise correction (on/off) • ROI
• Gain (manual control, 0 to 20 dB) • Exposure (manual control, 44.2 µs to 1.4 s) • Gamma
• Reverse X • DeviceLinkThroughputLimit (easy bandwidth control) • Sync out modes: Waiting for a trigger, exposing, readout, • imaging
• Storable user sets 1.3 Megapixels  

• Inspection • Quality control • Surveillance • Industrial imaging • Machine vision  
Model Mako U-130B  
Sensor Type 1/2 Progressive-scan-CMOS sensor monochrome
Resolution 1280 x 1024
Pixel size 4.8 µm
Frame rate 168 fps
Interface USB3 Vision
Bid Depth 8-/10-bit
Lens mount C-Mount, CS-Mount
Operating temperature +5°C to +45°C (housing temperature)
Power requirements (DC) Power over USB3
Power consumption (@12V) n/a, 2.7 W @ 5 VDC
Mass 60 g
Dimensions (LxWxH) 49.5 × 29 × 29 mm, incl. connectors; no tripod or lens
Mako U-130B data sheet  






If you like this page, please recommend and share it.

Google+ Facebook Twitter More