|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| Genie
TS-M2048 Go to Teledyne Dalsa Cameras Go to Ultra-high Resolution monochrome Cameras Go to GigE Cameras |
 |
The Genie TS-M2048 uses a monochrome CMOS sensor with a resolution of 2048 x 2048. Teledyne DALSA’s "Burst Mode" feature allows for image capture rates of 37.5 fps in 4 megapixel resolution with a true global shutter while maintaining exceptional image quality.
The Genie TS-C2048 takes advantage of GigE technologyand GigE Vision standards to transmit data over standard CAT-5e and CAT-6 cables to distances of up to 100 metres and link the camera directly to a PC.
| Key features | |
| • Uses standard PC Ethernet port and hardware | • Supports cable lengths up to 100 metres (CAT-5e or CAT-6) |
| • Simplified set-up with Sapera Essential software featuring CamExpert | • Engineered to accommodate industrial environment with a Ruggedize, screw mount, RJ-45 connector |
| • Auto-Iris (Video, DC or Motorized) | |
| Programmability | |
| • Higher frame rates in partial scan mode and Multi-ROI support - up to 16 | • Global electronic shutter with exposure Control |
| • Auto-Brightness Feature | • On-board flat-field correction |
| • Multi-Exposure Feature | • Programmable LUTs |
| • On-board Image compression | • Transfer On-Demand Function |
| • IEEE1588 Precise time Protocol | • Extended Dynamic Range Function |
| Typical applications | ||
| • Electronics manufacturing inspection | • Industrial metrology | • Intelligent traffic systems |
| Model | Genie TS-M2048 |
| Resolution | 2048 x 2048 |
| Sensor | CMOS monochrome |
| Max. frame Rate | 37.5 fps |
| Pixel Size | 5.5 µm |
| Output format | GigE Vision |
| Lens mount | CS-Mount |
| Operating temperature | -20 to +60c |
| Power supply | 12 to 24V or Power Over Ethernet (POE) |
| Dimensions | 49 x 49 x 56 mm |
| Weight | 196 g |
|
If you like this page, please recommend and share it. |
||
| More | ||
