The Jai CM-140GE-UV monochrome,
GigE camera with SXGA 1.4 million pixel
resolution is part of Jai's C3 (Camera Core Concept) family which
offers one core concept, one interface (GigE) and one simple choice and
is ideal for demanding industrial applications.
The 1380 x 1040 pixel UV-sensitive
(to below 200 nm), progressive-scan CCD sensor is capable of speeds of
16 full-resolution frames per second in continuous (free-run)
mode and up to 30 fps in external trigger modes. Higher frame rates can
be achieved by using the partial scan or vertical binning modes.
Other attractive features of the CM-140GE-UV
*** The small, common-size
housing allows for easy camera exchange
*** The GigE Vision
interface standard ensures high bandwidth (1000 Mbps), uncompromised
data transfer up to 100 meter cable lengths with the ability
to connect to multiple computers
*** Low cost cables, standard
hardware and high scalability allow for cost effective machine
vision and image processing applications.
*** The unique sequencer
function makes it possible to change exposure time, gain and ROI
on the fly.
*** The programmable General
Purpose IO allows flexible configuration of inputs/outputs as
well as the timer/counter function.
*** Available with a factory-installed
With its GigE architecture, the CM-140GE-UV is ideally
suited for use in a very wide variety of applications
where size, performance, cost or cable length is important.
||1/2" progressive-scan” CCD
||1380 x 1040
||4.65 x 4.65µm
||GigE Vision, 8-bit or 10-bit
|Max. Line / Frame Rate
||1/31 to 1/10,000 in 10 steps
||-5°C to +45°C
||12V DC +/-10%. 4.1W
||29 x 44 x 75 mm
JAI CM-140GE-UV Datasheet