|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| BL1-D1312(IE)-G2
series Back to Photonfocus Cameras Back to High Resolution Monochrome Cameras Back to GigE Cameras |
 |
Board-Level Cameras: |
Compact solutions for application-specific
systems |
|||
| BL1-D1312-40-G2-12
|
BL1-D1312-80-G2-12 |
BL1-D1312-100-CL-12
|
||
BL1-D1312-40(IE)-G2-12
available on request |
BL1-D1312-80(IE)-G2-12
available on request |
BL1-D1312-100(IE)-G2-12
available on request |
||
Equipped with the A1312 and A1312IE CMOS image sensors, this board level camera series BL1-D1312 (IE)-G2 is appropriate for easier integration into tailored customer applications, especially where space or weight is a limiting factor, but where all the features and technical data are identical to the standard cameras except for the mechanical dimensions. The footprint of these cameras is as small as 46 mm x 46 mm while the depth varies depending on the product type and chosen interface.
This series was derived from the MV1-D1312(IE)-G2
camera series and is 100% compatible with the feature set of the standard
series, the only differences being in the mechanical construction of the
camera case. These Photonfocus CMOS sensors with a full well capacity
(FWC) of 90 ke- are optimized for high dynamic range applications and
a high signal-to-noise ratio (SNR)and have a GigE interface. Three camera
models with different speed grades are available. Cameras woth an A1312
(IE) sensor are available on request.
Focusing on demanding applications in industrial image processing, the
cameras offer a wide dynamic range and a high frame rate combined with
high resolution. Their global shutter means that even high-speed applications,
with exposure times in the µs-area, are possible.
| Features | ||
| • Configurable Region–of–Interest; up to 512 | • 2 look-up tables (12-to-8 bit) on user-defined image region | • 3 x 3 convolver for image pre-processing in the camera |
| • Dynamic range up to 120 dB via LinLog® | • Integrated digital reduction of fix pattern noise (FPN) | • Integrated shading correction |
| • Spectral range: 370 - 1000 nm A1312 | • Temperature monitoring of sensor and camera | • Ultra-low trigger delay and low trigger jitter |
| • Spectral range: 370 - 1050 nm A1312IE | • BL1 form facto:r 46 x 46 mm² (W x H) | • Good near-Infra-red response (cameras with A1312IE sensor) |
| Model | BL1-D1312-40-G2-12 |
BL1-D1312-80-G2-12 |
BL1-D1312-100-G2-12
|
|
| Resolution | 1312 x 1082 pixels
|
|||
| Sensor | 1.4 megapixel progressive scan
1" CMOS monochrome |
|||
| Pixel Size | 8 µm square |
|||
| Max. Frame Rate | 27 fps |
55 fps |
68 fps |
|
| Interface |
GigE |
|||
| Pixel Clock | 40 MHz |
50 MHz |
||
| Grayscale Resolution | 8–bit/10–bit/12–bit
|
|||
| Mount Type | C-Mount–(CS-Mount–optional) |
|||
| Operating Temp | 0°C ... +50°C |
|||
| Power Requirements | +12V DC (±10%) |
|||
| Dimensions | BL1 form facto:r 46 x 46 mm² (W x H). Depth varies depending on the product type and chosen interface |
|||
Photonfocus BL1-D1312(IE)-G2 Series Board-level Camera Datasheet
|
If you like this page, please recommend and share it. |
||
| More | ||
