1.4 Megapixel GigE smart
camera with 1 GHz programmable DSP** |
The A1312 image sensor series is designed and fabricated in 0.35µm
CMOS technology to achieve an outstanding sensitivity and quantum
efficiency and optimized for applications in the visible as well
as the Near Infra-Red range up to 1100nm.
Due to a difference in internal design, **DSP-based
smart cameras consume much less power than CPU-based cameras and
so the DSP camera does not need a cooling fan.
The cameras target users with image processing and C/C++ programming
experience and this smart cameras are compatible with existing image
processing libraries offered by Halcon Embedded, OpenCV and others.
A framework program makes the use of the SM2-D1312 much easier as
there is no need to deal with memory access, DSP register etc. if
they are not required.
Another optional highlight is the JPEG compression
running on the FPGA which allows storing high-speed image
sequences at a rate of 70 fps on an 8GB SD flash card.
The stored images can then be downloaded via a FTP server running
on the smart camera or processed directly on the DSP.
|
Features |
• Global shutter and extended trigger functions |
• High dynamic range up to 120 dB via LinLog |
• Multiple Regions of Interest - up to 512 |
• 10 to 8 bit Look-up Table over user-defined image regions
|
• Built-in 1 GHz DSP (Digital Signal Processor) |
• 256 MB SDRAM |
• 2 GB SD-Card |
• Built-in webserver for camera control |
• Halcon
embedded software available |
• High Near Infrared (NIR) sensitivity up to 1100 nm) |
• Cost benefits of GigE interface |
• 12-bit greyscale resolution |
Model |
SM2-D1312-JPEG-100-GB-12 |
Resolution |
1312 x 1082 |
Sensor |
1" progressive-scan monochrome CMOS |
Pixel Size |
8 µm x 8 µm |
Video Output |
GigE |
Max. Frame Rate |
68 fps |
Pixel Scan |
50 MHz |
Mount Type |
C-Mount (CS-Mount optional) |
Operating Temp |
0 °C ... +50 °C |
Power Requirements |
12V DC, 8.0W |
Dimensions |
60 x 60 x 137 mm³ |
Weight |
572 g |
Photonfocus SM2-D1312-JPEG-100-GB-12 camera
|