The Phantom v2011 colour and monochrome camera is a 1 megapixel
digital high-speed camera designed with speed and flexibility in mind
and an excellent tool for researchers, scientists and engineers who need
to capture high-resolution images at ultra-high speeds.
The widescreen CMOS sensor can acquire and save up to 22 gigapixels-per-second
of data and, at its full megapixel resolution of 1280 x 800, greater
than 22,000 frames-per-second is possible. The camera can also
be ordered with a FAST option (export controlled), which enables frame
rates up to 1,000,000 fps at 128 x 32 resolution, thus further
expanding the v2011’s versatility.
The custom-designed sensor has 28 micron pixels and an innovative design
to ensure superb light-sensitivity -- essential in ultra-high-speed
imaging. Standard 12-bit depth per pixel yields high dynamic range and
provides excellent image quality.
Ease-of-use features such as Common signal connections,
are conveniently located on its back panel, and include connections for
timecode, dual power inputs, HD-SDI, a GPS input, frame synchronization,
and trigger. The two HD-SDI ports can be configured in several ways. They
can act as identical 4:2:2 HD-SDI ports where one port can be set up to
provide an (optional) on-screen display for monitoring the on-camera controls
and camera operation. They can also be configured as a single 4:4:4 Dual-Link
HD-SDI port.
An internal mechanical shutter allows for automatic and remote black references,
ensuring high image-quality even when the lens can't
be covered manually before the shot.
Image storage
At ultrahigh-speeds, memory can become a limitation to recording duration.
The v2011 can be equipped with 24GB, 48GB or 96GB of high-speed memory.
It is possible to segment memory into up to 63 and record shorter cines
into each segment. Cine save times can also be minimised by
using a CineMag non-volatile feature that comes standard on the v2011
and enables the saving of any shot from high-speed RAM to a CineMag
in seconds.
Advanced
Features |
|
Image-Based
Auto-Trigger |
Trigger
the camera (or a number of connected cameras) from motion detected
within the live image making it easier to catch events that are
not predictable or that occur infrequently
|
Internal
Mechanical Shutter |
With
an internal mechanical shutter, the black frame can be obtained
by simply closing the shutter. No physical access to the camera
is needed. |
Multi-Cine |
Partition
internal memory into segments and make shorter recordings back-to-back
without missing any action |
|
Continuous
Recording |
Continuous
recording is a mode that automatically saves a recorded cine to
a disk drive on a connected PC immediately after it is recorded
then re-arms the camera and waits for the next cine to be recorded
|
Burst
Mode |
Burst mode allows
you to trigger the camera at 0° and then take a burst of images
at precise time delays |
|
Quiet
Fans |
During
recording, turns the fans off to eliminate vibration which might
interfere with some applications, especially when image magnification
is required. |
Specifications
- Phantom V2011 - colour and monochrome |
Resolution
- full |
1280 x 800 |
Sensor |
CMOS , 28 µm
pixel size, 12-bit depth, Mono and colour |
Throughput speed |
22 Gpx/s |
Maximum frames
|
> 22 000 fps at full res. |
Video
Out |
Analog video available on Break-out-Box.
Two HD-SDI ports on camera. Component viewfinder port |
Memory |
24 GB, 48 GB, 96 GB high-speed
internal RAM. CineMag up to 512 GB |
Mount |
Nikon F-mount that also supports
F & G-mount lenses. Can also be equipped with a Canon EOS mount
or C-mount |
Dimensions/Weight |
28 x 19 x 17.75 cm (L,W,H) w/out
handle (7.6cm) or lens. 7.7 kg w/out lens |
Temperature |
-10 to +50 C - operating. -20
to + 70 C - storage |
Shutter |
Global electronic |
Power |
100 - 240 VAC, 220 Watt power
supply included. 20 - 28 VDC backup battery input on camera back
panel |
Phantom
v2011 Datasheet
|