4 Megapixel, CMOS sensor with almost 3 gigapixels/second throughput
and breakthrough sensitivity
2560
x 1600 resolution |
10 - 800 fps at full resolution |
1 µs minimum
exposure |
Built-in memory up to 32 GB |
Extreme
Dynamic Range (EDR) |
Made possible by Vision Research's improved sensor designs,
a significant reduction in readout noise and the addition of microlens
technology, the Phantom v341 digital high-speed video camera is ideal
for applications where high sensitivity and high resolution are
needed.
The 4-megapixel 35mm format sensor and almost-3-gigapixels/second throughput,
provide full-resolution frame rates of 800 frames-per-second at speeds
that normally only possible with larger pixel, lower-resolution cameras.
The wide view custom-designed 2560 x 1600 pixel CMOS sensor permits an
aspect ratio which allows moving targets to be kept in-frame longer and
so show more of the event being recorded. Shutter speeds down to 1 microsecond
and a global electronic shutter allow for crisp, sharp images with little
or no image blur or motion artifacts.
The camera supports 8- and 12-bit pixel depth; the smaller bit-depth
allowing more recording time and smaller files while the greater bit-depth
allows for more/finer detail to be extracted from the image.
This "range ready" camera has dual power inputs to protect data
in case of power failure (via battery backup), timecode in/out (IRIG or
SMPTE), Range Data input, and is manufactured with a new reflective colour
for better temperature stability when used outdoors. Convenience features
such as the Internal Mechanical Shutter, Image-Based Auto-Trigger, optional
On-Camera Controls, a
CineMag interface, ensures the ideal camera for range applications.
Its small size and light weight also makes it ideal for tracking mount
applications.
Recording directly into the Phantom
CineMag non-volatile, hot-swappable memory magazines which mount on
the CineMag compatible version of the camera providing not only greater
shooting/storage flexibility but also time-saving efficiencies.
The Phantom v341 is available
in monochrome and colour and
is available in two base models, either with or without CineMag interface.
An optical low-pass filter is available as an option.
Model |
Phantom v341 |
Resolution |
2560 x 1600 |
Sensor |
CMOS 35mm |
Video Out |
Analog. Dual HD-SDI. |
Interface |
Gb Ethernet for both control and data. 10 Gb Ethernet via CineStream
X2SR |
Frame Rate |
800 fps at full resolution. 130 000 at reduced resolution |
Memory |
8 GB, 16 GB, 32 GB high-speed internal RAM. CineMag for non-volatile
storage (128 GB, 256 GB, 512 GB). Segment memory for up to 63 cines
in multi-cine mode |
Mount Type |
Nikon F-mount standard; Canon EOS mount optional; PL-mount optional;
C-mount optional |
Operating Temp |
0°C - 40°C |
Vision Research Phantom v341 Camera Datasheet
|