|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Xtium2-CLHS FX series
Back to Teledyne Dalsa Frame Grabbers
Back to Camera Link HS Frame Grabbers
Ideal for maximising transfer rates when integrating imaging data to flat
panel display systems, the Xtium2-CLHS FX8 and Xtium2-CLHS FX8 LC frame
grabbers expand on the already established and field proven capabilities
of Teledyne Dalsa's Xtium frame grabber family.
Offering both fiber optic cabling (up to
300m) for the CameraLink HS interface on the PCI Express™ Gen 3.0
platform and boards that feature CLHS X-protocol, these frame grabbers
allow imaging applications maximum speeds.
With enhanced memory architecture, these frame grabbers allign with today's
constantly improving imaging technology.
Another feature of the Xtium2-CLHS FX8 and Xtium2-CLHS FX8 LC is its ability
to improve processing times and minimise CPU usage by delivering maximum
bandwidth.
Moreover, these frame grabbers feature host transfers of up to 6.8GB/sec
and are compatible with Microsoft Windows 7&10
(32/64-bit), WOW64 and Linux.
For no extra cost, the Xtium2-CLHS FX8 and Xtium2-CLHS
FX8 LC are entirely supported by Sapera LT SDK.
| Key
features |
|
| Xtium2-CLHS FX8 | Xtium - CLHS FX8 LC |
| • Supports up to four 2 CLHS lanes | • Support up to four 4CLHS lanes |
| • Aggregate bandwidth of up to 5.0GB/s | • Aggregate bandwidth of up to 2.5GB/s |
| • Camera Link HS compliant | |
| • Fully supported by Sapera LT SDK | |
| • Host transfers up to 6.8GB/sec | |
| • Fiber cabling using SFP+modules | |
| • Half-length PCI Express Gen 3.0 x8 board | |
| Model | Xtium2-CLHS
FX8 |
Xtium
- CLHS FX8 LC |
| Card | • Half-length
PCIe x8 card • PCIe Rev 3.0 compliant |
|
| Acquisition rate |
• Up to 5.0GB/s |
• Up to 2.5GB/s |
| Host transfers |
• Up to 6.8 GB/s |
|
| CLHS |
• CLHS 1 to 4 lane configurations • Up to 4 fiber cables • Support for CLHS acquisition trigger modes 1 through 4 |
• Up to 2 CLHS lane configurations • Up to 2 fiber cables • Support for CLHS acquisition trigger modes 1 through 4 |
| Resolution | • Horizontal
size: 64 bytes to 16 Kbytes
• Vertical size: 1 line to 16 million lines |
|
| Memory | • On board 512
MB image buffer
|
|
| Pixel format | • Mono8,
Mono10, Mono12 and Mono16
• RGB 8; RGB+Y 8-bit/color/pixel |
|
| Connectors | • 4x SFP+cages
with latch
• DH60-27P for Board Trigger, Strobe and General I/Os (main bracket) • 16-pin connector on the board for Board Sync and/or other usage |
|
| Temperature | • 10°C
to 50°C
|
|
| Dimensions | • 11.11cm
length x 9.96cm height
|
|
Click here to Download the
Xtium2-CLHS FX8 datasheet
Click here to Download the
Xtium2-CLHS FX8 LC datasheet
Need a price or information specific to
your application? Please email
Adept Turnkey or call our offices
About Sapera LT
Sapera LT is an image acquisition and control software development toolkit
(SDK) for Teledyne DALSA’S cameras and frame grabbers. Hardware
independent, Sapera LT offers a rich development system for machine vision
OEMs and system integrators. Sapera LT supports image acquisition from
cameras and frame grabbers based on standards including GigE Vision™,
CameraLink® and CameraLink HS™.
Image processing and analysis functions provided by Sapera include over 400 image processing primitives, barcode tool, pattern matching tools both area-based and edge-based, OCR, color, blob analysis, measurement and calibration tools for perspective and lens correction. The standard tools run-time license includes access to image processing functions, area based (normalized correlation based) template matching tool, blob analysis and lens correction tool.
|
If you like this page, please recommend it and share it. |
||
| More | ||
