AT logo - The Machine Vision Specialists  
  Frame Grabbers  
  Vision Systems  
  Contact AT  
  Site Map  

Machine Vision Newsletter


(08) 9242 5411

(02) 9905 5551

(03) 9384 1775

Defence Recognised Supplier Scheme Logo

Xtium CLHS PX series
Back to Teledyne Dalsa Frame Grabbers



Ideal for integration into flat panel, electronics, and semiconductor inspection, the Xtium-CLHS PX frame grabber series combines reliability and performance with up to seven data lanes. This results in the capacity to capture at aggregate data rates of 2.1GB/s and to sustain host transfer bandwidth of over 3.2GB/s (Xtium PX8).

Cost effective and easy to integrate, the Xtium CLHS PX frame grabbers feature seamless multi-board synchronization and built-in capability to re-distribute incoming images at maximum camera speeds to as many as six additional frame grabbers. Consequently, images can be distributed across multiple computers for processing.

Delivering maximum bandwidth without the need for specialized motherboards or chipsets, the Xtium PX minimizes CPU usage and improves processing times for host applications.

The Xtium series' enhanced memory architecture meets the ever-increasing image resolution and faster frame rates of today’s imaging technology and are fully supported by Sapera LT at no additional cost.

Key features
• Half-length PCI Express Gen 2.0 Board
Camera Link HS compliant
Supports acquisition rates up to 2.1 GB/sec
Host transfers up to 3.2 GB/sec
Data-forwarding for distributed image processing
Field proven CX4 cabling
User programmable 3x3 filter
Fully supported by Sapera Vision Software SDKs
FCC, CE, and ROHS compliant
Multiple board synchronization grab from multiple camera and multiple frame grabber in one seamless image buffer

Need a price or information specific to your application? Please email Adept Turnkey or call our offices

Xtium CLHS PX4
Xtium CLHS PX8
Half-length PCIe x4 PCIe Rev 2.0 compliant
Half-length PCIe x8 PCIe Rev 2.0 compliant
Acquisition rate
Up to 2.1 GB/s
Host transfers
Up to 1.7 GB/sec
Up to 3.2 GB/sec
• CLHS 1 to 7 lane configuration • Single CX4 cable input from camera • Support for CLHS acquisition trigger modes 1 through 4
• Horizontal size: 64 bytes to 16 Kbytes • Vertical size: 1 line to 16 million lines
On board 1024 MB image buffer
Pixel format
Mono 8, 10, 12, 16
• 1 x CX4 thumbscrew connector for incoming data from camera • DH60-27P for Board Trigger, Strobe and General I/Os (main bracket) • 16-pin connector on the board for Board Sync and/or other usage
10°C to 50°C
11.11cm length x 9.96cm height

Xtium CLHS PX4 data Sheet
Xtium CLHS PX8 data Sheet

About Sapera LT
Sapera LT is an image acquisition and control software development toolkit (SDK) for Teledyne DALSA’S cameras and frame grabbers. Hardware independent, Sapera LT offers a rich development system for machine vision OEMs and system integrators. Sapera LT supports image acquisition from cameras and frame grabbers based on standards including GigE Vision™, CameraLink® and CameraLink HS™.

Image processing and analysis functions provided by Sapera include over 400 image processing primitives, barcode tool, pattern matching tools both area-based and edge-based, OCR, color, blob analysis, measurement and calibration tools for perspective and lens correction. The standard tools run-time license includes access to image processing functions, area based (normalized correlation based) template matching tool, blob analysis and lens correction tool.


If you like this page, please recommend it and share it.

Facebook Twitter More