|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Onca Midave Infrared Cameras
Xenics
Infra red cameras
GigE cameras
Xenics Onca
MWIR MCT
Xenics
Onca MWIR InSb
Quality, flexibility and affordability: Xenics Onca for accurate analysis
|
**
High image resolution
|
**
Multi-spectral imaging
|
**
High flexibility in use
|
**
Highly-sensitive imaging performance
|
 |
|
| Combining high quality, high flexibility and affordability, the Onca series of mid wave cameras are perfect where performance is critical. | |
| Intended as an upgrade replacement for the Xmid range of cameras, the Onca series includes additional and more flexible features such as a filter wheel and thermography. |
The Onca family of MWIR cameras consists of four models
all using advanced real-time image correction and are equipped with either
state-of-the-art InSb or MCT sensors and with either
320 x 256 pixels or with 640 x 512 pixels. All models feature a Stirling
Cooler and have options for either CameraLink or Gigabit Ethernet
(GigE) for camera control and image acquisition. This high-speed output
offers 14-bit images.
The MCT sensor offers a spectral range from 3.7 µm
to 4.8 µm and the InSb camera from 3.6 µm to 4.8 µm with
an extended range option from 1.0 µm to 4.8 µm.
Both models offer two speed versions: a standard video
rate version and a high speed version - 60Hz or 320Hz
for the MCT cameras and 60Hz or 488Hz for the InSb cameras.
All camera functions can be controlled
and settings are stored in non-volatile memory to enable
maximum efficiency. All are optimized for highly stable stand-alone and
PC-driven thermal imaging and thermography applications.
Also incorporated as part of the Onca products, are Xenics' many useful
features found on their other Infrared cameras including Window
of Interest, Radiometric calibration, high
sensitivity and flexibility.
|
What are the benefits and features of the Onca MCT and InSb MWIR cameras? |
||
|
High definition images
|
Up to 640 x 512 pixels for high image quality. | |
| Extended
coverage for MW range (Onca InSb model) |
From 1 to 5 µm supporting all-weather and night vision applications | |
| Filter
Wheel |
Up to 5 filters can be added to the filter wheel in order to perform multi-spectral measurements | |
| Ultimate
dynamic range |
Hot and cold spots can be viewed in one sequence using super framing mode which increases the dynamic range | |
| Window of Interest | Increase frame rate and reduce overhead for high speed process monitoring | |
| Performance
optimization |
Easy and continuous access to control parameters such as integration time and frame rate | |
| Thermal imaging | Radiometric calibrations are available to measure temperatures of objects with utmost accuracy | |
| Comprehensive
thermal analysis |
Interface with Thermography Studio, most popular recording and analysis tool for dynamic events | |
| CameraLink and full frame rate for high speed imaging | Export real time more than 100 fps. | |
| GigE
Vision-compatible |
More than 100 images per second according to GigE Vision standard. | |
|
Xenics
Onca MCT and InSb MWIR cameras are
designed for use in?
|
|||
|
**
R&D (MWIR range)
|
**
Thermography
|
**
Non-destructive testing
|
**
Industrial process monitoring
|
|
DETECTING HEAT |
||||
 |
 |
 |
 |
 |
|
Cold cup
|
Electronics circuit
|
Formula1 vehicle
|
Motor cycle
|
Veins
|
| Summary of Specs |
Xenics
Onca MWIR MCT
|
Xenics
Onca MWIR InSb
|
|||
|
320
|
640
|
320
|
640
|
||
| Sensor type |
MCT
|
InSb
|
|||
| Pixels |
320 x 256
|
640 x 512
|
320 x 256
|
640 x 512
|
|
| Pixels pitch |
30 µm
|
15 µm
|
30 µm
|
15 µm
|
|
| Focal length |
25 mm
|
25 mm
|
|||
| Frame rate: video rate/hi speed |
60 Hz/320 Hz
|
30 Hz/120 Hz
|
60 Hz/488 Hz
|
30 Hz/120 Hz
|
|
| Camera control |
GigE; Serial channel CameraLink
|
GigE; Serial channel CameraLink
|
|||
| Power supply |
24 V
|
24 V
|
|||
| Dimensions |
250 x 170 x 190 cm
|
250 x 170 x 190 cm
|
|||
| Weight |
5 Kg (lens not included)
|
5 Kg (lens not included)
|
|||
Adept Electronic Solutions are "The Machine Vision and Imaging Specialists" and distributor of Xenics products in Australia and New Zealand. To find out more about any Xenics machine vision product please email us at: adept@adept.net.au or call us at Perth (08) 92425411 / Sydney (02) 99792599 / Melbourne (03) 95555621 or use our online contact us page.
|
If you like this page, please recommend and share it. |
||
| More | ||
