|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Xcelera HS PX8: defining the NEXT-GENERATION of frame grabbers
Go
to Dalsa
Go
to Xcelera HS PX8
Bringing new levels of performance
and flexibility
to machine vision applications
Recognising the emerging needs of bandwidth-hungry machine vision applications, DALSA has called on its field-proven design and manufacturing expertise to develop the Xcelera HS PX8, bringing traditional image-acquisition and processing technology to new levels of performance and flexibility.
Designed with the future requirements of the machine vision OEMs in mind, DALSA's Xcelera HS Series is shaping next-generation frame grabber capabilities to deliver image acquisition bandwidth of 1.8GByte/sec and host transfer bandwidth of 2GByte/s over multiple-lane PCI Express implementations, and with room to grow.
| What
features can I expect from the Xcelera HS PX8? |
|
|
** HS-Link Interface - Next generation image-acquisition interface. (Click here to learn about HS-Link) |
| ** Image acquisition at rates up to 1.5GByte/s |
|
| ** Ultra compact, field proven CX4 cable and connector |
|
| ** PCIe host interface (Click here to learn about PCIe host interface) |
|
| ** The combining of an HS-Link interface with onboard preprocessing functions such as shading correction, Bayer decoding etc |
|
| ** Image-acquisition bandwidth of 1.8GByte/sec and host transfer bandwidth of 2GByte/s over multiple-lane PCI Express |
|
| ** Trigger-to-Image Reliability technology framework (Click here to learn about Trigger-to-Image technology) |
|
| ** Built-in support for data forwarding for distributed processing |
|
| ** Dedicated communication channel supporting data rates up to 300MByte/s (600MByte/s total) | |
What software supports the Xcelera HS
PX8?
The Xcelera HS PX8 frame grabber is supported by DALSA’s Sapera
Essential software package, a cost-effective machine vision software toolkit
that bundles board level acquisition and control with advanced image processing
capability and now featuring a value-added, all-new geometric
search tool.
How do I benefit from using this software?
Sapera Essential is designed to deliver the critical functionality
needed to design, develop and deploy high-performance machine vision applications
while at the same time significantly lowering deployment costs.
| Quick
Specs |
|
| Resolution | Horizontal size: 8 bytes to 256 Kbytes. Vertical size: 1 line to infinite for line scan, 1 line to 16 million lines in area scan. Support variable frame length (up to 16 million lines) |
| On-Board Memory | 256MB |
| Card Acquisition | Half-length PCIe card, compliant with PCIe Rev. 1.1. 1 x camera based on CX4 cable technology. Area scan and line scan. Data rate up to 1.5 GB/sec |
| Scanning | Progressive |
| Pixel Format | Support for 8-bit. Future options: 10, 12, 14 and 16-bit mono, 24-bit RGB and Bayer |
| Max. data rate | Front End BW: 1.5 GB/sec. Back End BW: 1.5 GB/sec |
What is...?
HS-Link Interface
The HSLink1 interface is a new machine vision connectivity interface pioneered
by DALSA. HSLink is designed specifically to meet the needs of all machine
vision applications and therefore carries image data, configuration data
and low jitter, real time triggering signals over a simple network topology
supporting cameras, intermediate devices and frame grabbers. The interface
has taken the key strengths of Camera Link, and added new features and
functions. HSLink delivers scalable bandwidth of 300 to 6000 Mbytes/s,
1x to 20x configurations while using globally available, off-theshelf
components.
PCIe host interface
PCIe host interface is a point-to-point
host interface and allows simultaneous image acquisition and transfer
involving little intervention from the host CPU
Trigger-to-Image Reliability
technology framework
Trigger-to-Image Reliability technology framework leverages
DALSA’s hardware and software innovations to control, monitor and
correct the image acquisition process from the time that an external trigger
event occurs to the moment the data is sent to the host providing traceability
when errors do occur and permitting recovery from those errors.
Adept Electronic Solutions are "The Machine Vision and Imaging Specialists" and distributor of DALSA products in Australia and New Zealand. To find out more about any DALSA machine vision product please email us at: adept@adept.net.au or call us at Perth (08) 92425411 / Sydney (02) 99792599 / Melbourne (03) 95555621 or use our online contact us page.
|
If you like this page, please recommend and share it. |
||
| More | ||
