|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Now released: a NEW GENERATION of high-resolution, high-speed CMOS area scan cameras from Teledyne DALSA
Go
to Falcon2 4M
Go to Falcon2 8M
Go to Falcon2 12M
Go to Ultra-High resolution monochrome
cameras
Go to Ultra-High resolution colour
cameras
Go to High speed cameras
Go to Teledyne DALSA
Falcon2 family of CMOS area scan cameras: built around Teledyne DALSA's most advanced technology
 |
 |
 |
 |
About the Falcon 2 series
Built around Teledyne DALSA’s proprietary and most advanced CMOS technology, the Falcon2 monochrome and colour series includes 4M, 8M and 12M models and delivers (quoted in 8-bit sensor mode, 8-bit 10 tap, CameraLink mode):
•
4 Megapixels at 168 frames per second |
•
8 Megapixels at 90 frames per second |
•
12 Megapixels at 58 frames per second |
Features such as global shutter (which removes unwanted smear and time displacement artifacts related to rolling shutter CMOS devices) and improved image quality make these Falcon2 cameras the camera of choice in applications where throughput, resolution and dynamic range matter.
The latest CMOS sensor has reduced dark noise levels and improved dark offset, FPN (fixed pattern noise) and PRNU (Pixel Response Non-Uniformity) levels. In addition, region of interest features will offer opportunities for higher frame rates and new applications.
The Falcon2 cameras are compliant with GenICam™ and full Camera Link™ specifications—delivering 8 or 10 bits of data on 8 taps (frame rates are specified at 8 bits) and the M42x1 thread opening allows the use of lens of choice.
| Key benefits and features | ||
| • High responsivity | • Exposure control | • Concurrent integration and readout |
| • Global shutter and reset | • Base Mini-Camera Link | • Adjustable gain, offset and timing modes |
| • Flat field correction | • Faster frame rates through vertical windowing | • Test patterns and camera diagnostics |
| Typical applications | ||||
| • Semiconductor wafer inspection | • Electronics manufacturing | • 3D imaging—Laser profiling | ||
| • Surface and bump inspection | • 3D solder paste inspection | • Solar panel inspection | ||
| • Package and bump inspection | • General machine vision | |||
| • Automated Optical Inspection | ||||
| Quick specifications | Falcon2
4M |
Falcon2
8M |
Falcon2
12M |
| Sensor | CMOS |
||
| Resolution | 2432 x
1728 |
3328 x 2502 |
4096 x
3072 |
| Frame rate | 168 fps |
90 fps |
58 fps |
| Pixel size | 6 µm |
||
| Responsivity | 30 DN/(nJ/cm²) |
||
| Interface | 2 x Camera
Link Full - SDR26 |
||
| Lens mount | M42 x 1 |
||
| Operating temperature | 0 °C
to 50 °C, front plate temperature |
||
| Power supply | 12 V to
24 V DC |
||
| Dimensions | 60 mm (H)
x 60 mm (W) x 80.5 mm (D) 75 mm excluding back fins |
||
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging Specialists" and distributor of Teledyne Dalsa products in Australia and New Zealand. To find out more about any Teledyne Dalsa machine vision product please email us at: adept@adept.net.au or call us at Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne (03) 9350 7377 or use our online contact us page.
|
If you like this page, please recommend and share it. |
||
| More | ||
