New
Sapera SDK for Teledyne DALSA CameraLink cameras
Designed for GenCP-ready Piranha 4 and Falcon 2 cameras
when using 3rd-party frame grabbers
Available free and for immediate download, is the Sapera
Camera SDK providing a rich set of software API to control
and configure supported cameras using the CameraLink serial port provided
by the 3rd-party frame grabbers. (Note: The Sapera Camera SDK does not
replace 3rd party frame grabber software APIs. Vendor specific API must
be used to configure and acquire images with the vendor- supplied frame
grabber.
The Camera SDK installations include the following:
1. Sapera Camera SDK: CamExpert Tool, Development libraries, programming
example with source code and documentation.
2. Sapera Camera SDK Redistributables: run-time libraries to be distributed
with the user applications to control and configure the cameras.
The camera supports
both 64-bit and 32-bit versions of Microsoft Windows XP,
Windows Vista and Windows 7 using the following: |
|
For 32-bit C/C++ development, use
one of the following compilers:
Visual C++ version 6.0, Visual C++ 2003, Visual C++ 2005 (with Service
Pack 1), Visual C++ 2008 (with Service Pack 1),Visual C++ 2010 |
|
• |
For 64-bit C/C++ development, use one
of the following compilers:
Visual C++ 2005 (with Service Pack 1),Visual C++ 2008 (with Service
Pack 1), Visual C++ 2010 |
|
|
• |
For .NET development, use one of the
following development environments:
Visual Studio 2005 (with Service Pack 1), Visual Studio 2008 (with
Service Pack 1) Visual Studio 2010 |
The following 3rd party frame grabbers have
been verified to work with the new SDK:
• Matrox® : Radient eCL
• BitFlow™: Karbon-CL
• Silicon Software GmbH: microEnable IV CL:
• Epix PIXCI® EL1DB:
IMPORTANT - When using GenCP compliant Teledyne DALSA cameras with
Teledyne frame grabbers, Sapera LT must be used instead of the Sapera
Camera SDK. It is not possible either install or use Sapera Camera SDK
with Teledyne DALSA frame grabbers.
Please contact us if you would like
a copy of the new Sapera SDK update
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging
Specialists" and distributor of Teledyne DALSA products in Australia
and New Zealand. To find out more about any Teledyne DALSA machine vision
product please email us at: info@adeptturnkey.com.au
or call us at Perth (08) 92425411 / Sydney (02) 99792599 / Melbourne
(03) 95555621 or use our online contact
us page.
|