New
firmware release for Piranha 4 4k trilinear colour camera, model P4-CC-04k07T-00-R
Go
to Piranha4 4k 70 kHz
Go to Teledyne DALSA
Teledyne DALSA has released new firmware for the Piranha4 Trilinear
colour linescan camera (Piranha4 4K 70 kHz, model P4-CC-04k07T-00-R)
to improve performance and add new features.
Firmware
|
Version |
• FPGA |
03-056-20444-03 |
• Microcode |
03-081-20282-05 |
• CCI |
03-110-20277-03 |
• XML |
03-119-20010-01 |
Performance
Improvements - all improvements are backward-compatible
|
•
Streaming |
Improved existing
streaming |
• DEK instruction |
Added DEK instruction |
• Spatial correction
range |
Extended spatial correction
range from 5 to 6 lines |
• Max line rate |
Corrected max line rate error
in 80-bit deca mode |
• 4096 active
pixels |
Added 16 active pixels to existing
4080 active pixels for full 4096 pixel outputs |
• Exposure time |
Retired limitations of exposure
time settings on colour channels |
New
features
|
•
Horizontal binning |
Added horizontal
binning x 2 |
• Parallax correction |
Corrected image artifact when
camera is installed at an angle other than 90° to the web |
|
|
Field Upgradability |
|
•
The new firmware for the P4-CC-04k07T is field-upgradable. |
|
|
Compatibility
with Teledyne DALSA software |
•
The new firmware requires Sapera LT version 7.20 or later |
|
|
There
are no other changes to the performance specifications in the Users
Manual except for the changes above |
|
|
Please contact us for details
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging
Specialists" and distributor of Teledyne DALSA Technology products
in Australia and New Zealand. To find out more about Teledyne DALSA
products or any machine vision product, please contact
us or call Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne
(03) 9384 1775
|