|
|
The
Hygienic Machine Vision building kit for your critical hygiene application
Back
to Newsletter
Hygienic
Machine Vision-Building Kit
|

The Hygienic
Machine Vision Building Kit makes it easy to install Machine Vision
equipment in food and pharmaceutical production with prefabricated
parts.
The kit allows camera placement in any position and orientation
- even in critical food contact and dripping areas above the food
- in a food-safe and law-compliant manner.
Components
1. Hygienic PLUS Dolphin and Shark enclosures for cameras and
lights.
2. Hygienic PLUS Piranha laser enclosures.
3. Hygienic PLUS T-Pieces for 30mm Ø rod and enclosure
connection.
4. Hygienic PLUS 90° Elbows for 30mm Ø rod and enclosure
connection.
5. Hygienic PLUS 30mm Ø stainless steel rods in various
lengths, with M25 thread on one end.
6. Hygienic PLUS rear mount.
7. Hygienic PLUS front mount foot.
|
Key
features of Hygienic Machine Vision Building Kit
|
All
components comply with the highest hygienic design requirements:
• Easy
to clean
•
Seals between adjacent surfaces prevent bacteria build up.
•
Smooth surfaces easy to clean.
•
All sealing material with regulator approval.
•
Acrylic windows with regulator approval.
•
Undercut and dead spot free design, sloping surfaces and sealed
threads prevent contamination risks
Plus many more features:
•
All components
are easy to install and adjust
•
The mounting components allow a large degree of mounting variance
•
Internal clamping of T-Pieces, Elbows and Foots are extremely
robust.
•
High grade stainless steel V4A (AISI 316L). Seals withstand harsh
cleaning agents that can be used - for
instance in the meat industry.
•
All components are rated IP69k suitable for high pressure
wash-downs at 100 bar and 80°C.
• Camera
and laser enclosures with very good heat dissipation
|
Dolphin
IP69k hygienic PLUS camera enclosure
|
Features
High grade stainless steel V4A ( AISI 316L)
All sealing material with regulator approval, regulator
certified acrylic windows available.
Strict hygienic design, suitable for use in food contact
and dripping areas.
Window easy to clean/change thanks to snap ring mount.
Rear wall locks with 45° turn and slight tightening
of screws.
Dual seal on all lids, window and cable glands.
Good heat dissipation with inbuilt cameras.
Easy to mount hygienically with the 30mm Ø, 100mm
long shaft handle, that also serves as cable conduit.
3 different lengths and 30mm enclosure extension rings
available.
5 different versions available, depending on mounting
situation.
Cameras that fit into the Dolphin enclosures:
The Dolphin enclosure has the same internal diameter as the
Salamander enclosure, so the same compact cameras fit, for instance:
Cameras with a square cross section of 40x40mm
Cameras with 29mm height and a maximum width of 47mm.
All cameras with a diagonal of less then 55mm.
We can also mount cylindrical objects with 19, 20 and
30mm diameter (laser, pattern projectors, spot lights, etc.).
|
Shark
1P69 Hygienic PLUS camera enclosure
|
Features
High grade stainless steel V4A ( AISI 316L)
All sealing material with regulator approval, regulator
certified acrylic windows available.
Strict hygienic design, suitable for use in food contact
and dripping areas.
Windows are easy to clean/change with snap ring mount.
Rear wall locks with 45° turn and slight tightening
of screws.
Dual seal on all lids, window and cable glands.
Good heat dissipation with inbuilt cameras
Easy to mount hygienically with the 30mm Ø, 100mm
long shaft handle, that also serves as cable conduit.
3 different lengths and 30mm enclosure extension rings
available.
5 different versions available, depending on mounting
situation.
Cameras that fit into the Shark Enclosure
Cameras with a square cross section up to 60x60mm (62x62
with at least 4mm corner radius).
Cameras with 50mm height and 70mm width and at least
2mm corner radius.
Smaller cameras that would fit into the Dolphin enclosure,
but require a lens with diameter greater 55mm.
|
Piranha
IIP69 Hygienic PLUS laser enclosure
|
Features:
Houses 19 Ø 20mm Ø laser in a Hygienic
PLUS IP69k enclosure.
Laser mount with good heat dissipation.
Window easy to change thanks to snap ring mount.
Deep lid ensures that the focus adjustment ring is accessible
after front lid removal.
All Lasers with or without focus adjustment ring
- can be mounted close behind the front window.
Standard Piranha enclosure shipped with standard V4A
(AISI 316L) cable gland with 16mm bore.
|
|
Need a price or more application information? Please
email Adept Turnkey or call our offices
Adept
Turnkey Pty Ltd is "The Machine Vision and Imaging Specialists"
and distributor of autoVimation products in Australia and New
Zealand. To find out more about any autoVimation product, please
call Adept Turnkey at Perth (08) 9242 5411 / Sydney (02) 9905
5551 / Melbourne (03) 9384 1775 or contact
us online.
|
|