Teledyne DALSA's new QuantaPro 4M TE high-sensitivity thermo-electric
cooled full-frame area camera is designed to deliver ultra-low
noise in low light conditions and long integration times.
With a GigE or CameraLink interface for ease-of-use
and ease of system integration this camera provides an economical
solution by employing a front-illuminated (FI) device with QE approaching
that of back illumination (BI). A small back focal distance of less than
9 mm, allows use with large optics.
The single output format running at 10 MHz provides competetive frame
rates without the difficulties associated with multi-output tap matching.
Dark current reaches 0.1 e / pix / sec at -35 oC and a linear 16-bit digitization
pushes dynamic range to 10,000 : 1.
Linear 16-bit digitization provides dynamic range to >10000:1 (82
dB) and the single output format running at 10MHz allows for higher frame
rates without the complications of multi-output tap matching.
Other
features |
|
|
• Internal thermoelectric cooling
to -35°C with anti fog feature |
• Large 5 cm x 5 cm format with highly
sensitive 24 µm pixels |
• Single power rail |
• External Trigger |
• Programmable ADC gain |
• Binning 2 x 2, 4 x 4, 8 x 8, 16
x 16 |
• Low power consumption |
• Small form factor |
• Highly sensitive |
Typical
imaging applications
|
• Medical |
• Dental |
•
Scientific |
•
Astronomical |
|
Model |
QuantaPro 4M TE |
Resolution |
2084 x 2084 pixels |
Sensor |
CCD monochrome area scan |
Max. Frame Rate |
2 fps (no binning) |
Interface |
CameraLink and GigE Vision |
Data format |
16-bit |
QE |
Peak QE 70% at 650 nm |
Dynamic range |
82 dB, typical |
Power |
+24 VDC |
Operating temperature |
-20 °C to +40 °C |
Dimensions |
120 mm x 120 mm x 178 mm |
Weight |
2.5 kg |
Teledyne DALSA QuantaPro 4M TECamera Datasheet
|