All-in-one, megapixel, smart Gocator 2300 sensor raises the bar for quality
3D inspection
Go
to Gocator 2300 series
Go to 3D Cameras
Go to LMI Technologies
Megapixel 3D smart sensor
measures fine details down to microns
•
High speed and low latency |
•
Setup and control via web browser |
•
Built-in tools; no programming |
•
Pre-calibrated to scan micron-level details |
•
Required open-source SDK |
|
Many
of today's 3D measurement and control applications require higher-resolution
devices to inspect small parts over a large field of view.
Addressing this market need, LMI Technologies has expanded
their revolutionary Gocator product line to include the2300
megapixel family of pre-calibrated all-in-one 3D smart sensors.
LMI's Megapixel Gocator sensors provide 3D profile data
with resolution down to the micron level, at faster
speeds than previous models.
The Gocator 2300 series is designed to share the same Clearance
Distance (CD), Measurement Range (MR) and Field of View (FOV)
as the previous series, but with significantly increased resolution.
The Gocator web browser interface and open source SDK to support
the new megapixel sensors remain the same.
Why choose Gocator 2300?
Smaller and faster: side-by-side
sensors communicate via GigE interface
While smaller in size than the 2000 models, the 2300 series outputs
data at a four-fold rate compared to earlier models and to accommodate
the higher data rate, the new sensors communicate with a Gigabit
Ethernet interface for faster data delivery.
Being smaller and lighter (less than 1.5 kg), the 2300 series
is easier to install in confined spaces or on robotic
arms. Also the narrower sensor package makes it simple
to mount sensors in a side-by-side configuration to scan wide
surfaces without gaps in coverage.
|
Cost
savings
The Gocator 2300 family reduces the cost of factory automation
by making product validation easy to implement and maintain.
Simple to integrate and industrially designed for
the rugged needs of the factory floor, Gocator 3D smart sensors are
packed with built-in tools that can have a big impact on the bottom
line. Megapixel resolution
measures the finer details
Gocator 2300 sensors measure micron level features leveraging
megapixel resolution while maintaining large fields
of view and can now screen parts for very small defects,
raising the bar for quality inspection.
High-speed data delivery
Gocator's powerful processing engine and Gigabit Ethernet interface
will deliver profile data up to 5000 Hz.
Impressive Flexibility
Regardless of the type of system, Gocator 2300 sensors are easy
to integrate. The available Modbus TCP support makes integrating
into PLC-controlled systems easy and achievable without additional
software development. The Open Source SDK allows advanced users to
have full control and create additional value from their Gocator sensors
and systems Ease of use
Gocator’s built-in web server allows for flexible configuration
of profiling settings and measurement tools via all major web browsers,
on any computer and operating system. With no additional software
to install, Gocator’s out-of-the box setup and configuration
is fast and easy. Standalone
and scalable
Single sensors require no additional controllers, amplifiers or PCs.
Gocator systems can effortlessly scale to multiple sensors using LMI
Master hubs which take care of power distribution, laser
safety interlock, encoder and digital input handling, and microsecond
synchronization. Compact and
light weight and robust
Gocator’s small footprint and less than 1.5 kg weight make it
ideal for fitting into tight spaces and mounting onto robotic
arms. |
Quick Specs
Model |
2330 |
2340 |
2350 |
2370 |
2380 |
|
Data points |
1280
|
Resolution Z (mm) |
0.006 - 0.014 |
0.013 - 0.037 |
0.019 - 0.060 |
0.053 - 0.173 |
0.071- 0.413 |
Resolution X (mm) |
0.044 - 0.075 |
0.095 - 0.170 |
0.150 - 0.300 |
0.275 - 0.550 |
0.375 - 1.100 |
Measurement Range |
80 |
210 |
400 |
500 |
800 |
Field of view |
47-85 |
96-194 |
158-365 |
308-687 |
390-1260 |
Scan rate |
Approx.
170Hz to 5000 Hz |
Interface |
Gigabit
Ethernet |
Dimensions |
49x75x142 |
49x75x197 |
49x75x272 |
Weight (kg) |
1 |
1.15 |
1.45 |
Operating temp |
0 to 50°C |
Storage temp |
-30 to 70°C |
Housing |
Gasketed aluminum
enclosure, IP67 |
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging
Specialists" and distributor of LMI products in Australia and New
Zealand. To find out more about any LMI machine vision product please
email us at: adept@adept.net.au
or call us at Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne
(03) 9350 7377 or use our online contact
us page.
|