|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
New firmware v1.20 for all Genie TS Standard Monochrome models
Go to Teledyne
Dalsa
Go to Ultra-high-resolution Monochrome
cameras
Go to GigE cameras
Genie TS Monochrome 2M-4M-5M-8M-12M-Firmware now available
Teledyne DALSA have released an expanded Genie TS feature set with new field upgradable FPGA designs for no extra charge. The firmware is a field-upgradable design file enabling this camera family with specific features, to support a variety of embedded operations.
In addition to the new standard firmware v1.20, TeleDyne DALSA has added a design that offers in-camera JPEG compression to both the models based on the DALSA Vouvray sensor (5, 8 and 12M monochrome models) and the Cmosis CMV sensors (2 and 4M monochrome models). Additionally, for the Genie TS models based on the CMOSIS CMV sensors (2 and 4M monochrome models), Teledyne DALSA offer a third design that allows doubling the speed of acquisition to internal memory.
| The following table lists the Genie TS Monochrome camera firmware designs currently available for each model. | |||||
| Camera |
Sensor
model |
Standard
Design |
JPEG
Design |
Fast-mode |
|
| Genie TS-M4096 (12M) | Dalsa Vouvray |
••• |
••• |
X |
|
| Genie TS-M3500 (8M) | Dalsa Vouvray |
••• |
••• |
X |
|
| Genie TS-M2500 (5M) | Dalsa Vouvray |
••• |
••• |
X |
|
| Genie TS-M2048 (4M) | CMOSIS cmv4000 |
••• |
••• |
••• |
|
| Genie TS-M1920 (2M) | CMOSIS cmv2000 |
••• |
••• |
••• |
|
Click
links above to read more about the Genie camera families |
|||||
| Standard Design v 1.20 | Encompasses all features released in previous firmware versions along with new features. This design is GigE Vision 1.2 compliant and requires GigE Vision 1.2 or greater compliant GigE Vision third party software. For Sapera LT users, this design is compatible with the Genie TS Framework v1.00 or greater. | ||||
| JPEG Design v 1.20 | Initial JPEG Firmware release.
This design is GigE Vision 2.0 compliant and requires GigE Vision
2.0 or greater compliant GigE Vision host software. For Sapera LT
users, the minimum Genie TS Framework required is 1.20 or greater. The JPEG camera firmware and feature set supports the output of JPG images. This is an advanced processing design to provide JPEG image accelerated compression, maximizing frame rate transmission over Ethernet. |
||||
| Fast Design v 1.20 | Initial release. Camera firmware and feature set streamlined for accelerated acquisition speed (2x). This firmware omits various processing features to achieve the Fast Mode Design goals. This Design is GigE Vision 1.2 compliant and requires GigE Vision 1.2 or greater compliant GigE Vision host software. For Sapera LT users, this design is compatible with the Genie TS Framework v1.00 or greater. | ||||
| Features overview |
||
| • | Support
for Metadata (not available with JPEG Design) |
|
| • | Dual binning for
increased sensitivity |
|
| • | Multiple lookup
table pre-processing (available with Std Design) |
|
| • | Multiple real-time
Flat Field processing available with image cycling (unavailable
with FastMode Design) |
|
| • | Dynamic defective
pixel detection (not available for JPEG Design) |
|
| • | Smoothing / Sharpening
image filtering (only for Standard Design) |
|
| • | High dynamic range
support with a Multi-slope function |
|
| • | Auto-Brightness
(Auto-exposure, Auto-gain (AGC)) |
|
| • | Supports cycling
multiple exposure times for sequential images along with other
parameters |
|
| • | Image timestamp
via 1µs internal timer or by external events |
|
| • | Provides 2 User
Settings sets to store and recall camera configurations |
|
| • | RS-232 & RS-485
Serial Port Control |
|
| • | UPNP support |
|
| • | User memory available
via FTP access |
|
| • | These
standard firmwares are compatible with releases v1.10 and v1.11 |
|
Please contact us for more information about this release
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging Specialists" and distributor of Teledyne DALSA products in Australia and New Zealand. To find out more about Teledyne DALSA products or any machine vision product, please contact us or call Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne (03) 9384 1775
|
If you like this page, please recommend and share it. |
||
| More | ||
