|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| SG-1x-01K80 Back to Dalsa Cameras Back to Line Scan Cameras Back to GigE Cameras |
 |
The Spyder3 GigE surpasses its predecessor, the Spyder2, with 3x more responsivity. At its core is DALSA's latest line scan technology that achieves unprecedented responsivity.
The Spyder3 GigE is fully programmable, offering precise control over key performance variables such as gain and offset. A GUI is provided allowing you to begin imaging in minutes.
For those OEMs migrating from the Spyder or Spyder2, the Spyder3 GigE does not require a new optics design because pixel size and fill factor remain unchanged at 14 µm and 100% respectively. Also, with a GigE interface, you no longer need a frame grabber which means significant system cost savings.
In addition to its high performance and affordability, Spyder3 GigE also incorporates advanced features such as flat field correction and CDS (Correlated Double Sampling) .
| Model | Spyder3 SG-1x-01K80 |
| Resolution | 1024 |
| Data Rate | 2 x 40 MHz |
| Max. Line/Frame Rate | 68 kHz |
| Data Format | 8 bit / 12 bit |
| Pixel Size | 14µm x 14µm |
| Video Output | Gigabit Ethernet |
| Dynamic Range | 1400 : 1 |
| Gain | ± 10db |
| Lens Mount | M42 x 1 / C mount / F mount |
| Operating Temp | 0°C - 50°C |
| Power | 12-15V , 8.5W |
| Dimensions | 72 x 60 x 50 mm |
| Weight | 300g |
DALSA Spyder3 SG-1x-01K80 Datasheet|
If you like this page, please recommend and share it. |
||
| More | ||
