The LT-400CL is a prism-based colour line scan cameras
built around a series of three custom-designed CMOS linear
sensors.
Key features
It features three, high-performance CMOS, prism-mounted sensors,
each with 4096 (4K) pixels. outputting 4K line resolution at 16,180 lines
per second while maintaining image quality at a signal-to-noise ratio
of 55 dB or higher.
The single optical plane of the prism-based design eliminates
off-angle viewing problems, complicated alignments, and other
issues that often create issues with tri-linear camera alternatives.
Typical of JAI’s multi-imager colour cameras, the dichroic coatings
on the prism boundaries provide steep spectral curves
which minimize colour “crosstalk” and so provide superior
colour precision compared with tri-linear or dual-line colour
solutions. These hard dichroic coatings also don’t suffer the degradation
of the soft polymer dye filters on the other types of sensors consequently
giving accurate color performance over a longer product life span.
Application
The sub-pixel sensor alignment delivers precise colour values for each
pixel, making the camera ideal for web-based inspections
where accurate color information is required.
Click
to view video on 3CCD prism technology
Model |
LT-400CL |
Sensor |
3 x CMOS line scan sensors mounted on RGB
splitter prism |
Resolution |
4096 (4k) pixels per line |
Pixel Size |
7µm x 7µm |
Video Output |
3 x 8 bits or 3 x 10 bits through Camera Link
|
Max. Line rate |
61.8µs (Full resolution/binning/internal trigger);
80 MHz pixel clock |
Trigger Modes |
No-shutter, shutter-select and pulse width control |
Lens Mount |
M-52 mount. (Standard) Nikon F-mount. (Factory option) |
Operating temperature |
-5°C to +45°C/20 – 80% non-condensing |
Power |
12V DC to 24V DC ± 10%. |
Dimensions |
90 mm x 90 mm x 120 mm (without connector
and lens mount protrusion) |
Weight |
830 g |
JAI LT-400CL Datasheet
|